Navara Offroad
  • Home
  • Shop
    • Winch Cradle
    • Snorkel Grill - Genuine Nissan
    • Snorkel Grill - Safari
  • Contact

Designed to suit the Nissan D22 NAVARA
with genuine alloy bullbar.

Picture
Our winch cradle solves the problem facing many Navara owners.
Until now you couldn’t put an electric winch into your Nissan Navara fitted with a genuine alloy bullbar as there wasn’t a winch mounting plate available. With our customers in mind we developed this cradle to solve the problem.

Made to suit 99% of winches on the market.
(including Chinese copies)
Picture
When designing this winch cradle compatibility was a key requirement.  That’s why we employed the Warn Winch mounting footprint. Warn has become the industry standard for electric winches and as a result most other manufacturers have copied their mounting specifications.

Roller or Hawse fairlead compatible.

Picture
Whether you’re running synthetic rope or steel cable we have you covered. Once again we utilised the industry standard for the fairlead mounting so both roller and hawse fairleads will fit.

Built to last.

Picture
Made from 6mm cold rolled mild steel they are strong, VERY STRONG!

Not only that, they come finished in a gloss black powder coat finish to ensure it stays looking good for years.


Don't spend $1,000's to fit a steel bullbar.
Picture
There is no need to change to a steel bullbar just to fit a winch. At a fraction of the cost to replace your bullbar you can achieve the same result using our winch cradle. 

Reduced vehicle weight.
Picture
By removing the need to install a heavy steel bulbar you reduce the weight over the front axle. The effect of this is;
  • Decrease fuel consumption.
  • No need to upgrade front suspension.
  • Reduce tyre wear.
  • Increase vehicle carrying capacity.



Easy to fit yourself.
Picture
Thanks to our comprehensive fitting instructions installation couldn’t be easier. Even people with little mechanical knowledge can competently tackle the install.


Picture
What is included in the kit?
The kit comes with all the necessary components for the installation. A full list of components is provided below.

Can I fit this winch cradle myself?
Yes. Thanks to our comprehensive “step by step” fitting instructions installation couldn’t be easier.

Do I need any special tools to fit this cradle?
No, we have designed this winch cradle in such a way that only basic hand tools are required to perform the installation.

Will it fit my bullbar?
Yes - Provided you have the genuine Nissan Alloy bullbar as pictured above the cradle will fit. 

How long will it take to fit my winch cradle?
A competent mechanic should take about 1 hours to fit the cradle. This includes removing the bullbar, installing your winch onto the winch cradle and refitting the bullbar. This time will vary however depending on the experience of the installer.

Has this winch cradle been certified for airbag compatibility ?
Yes - You can rest assured knowing that our winch cradle has been certified for airbag compatibility.


Picture
1 X Winch Cradle
4 X M12 * 50 High Tensile Bolts
4 X M12 Nuts
4 X M12 Spring Washers
8 X M12 Flt washers
4 X 5/16 * 1 3/4" High Tensile Bolts
4 X 5/16 Nuts
4 X 5/16 Spring Washers
8 X 5/16 Flat Washers
1 X Comprehensive Fitting Instructions


Picture
d22wc-0815.pdf
File Size: 853 kb
File Type: pdf
Download File

Copyright Navara Offroad 2020